Ter thai 德泰

Ironworker

Double Cylinder Ironworkers
The double cylinder "S/SD" series, ranging from 60 tons to 165 tons of punching force, are in the Sunrise tradition of well engineered ironworkers built for high power, quality, and reliability. These ironworkers have two control foot paddles, and separate operations can be safely performed simultaneously. The low pressure setting for tool change provides maximum operation safety. The long punching cylinder stroke and deep throat enable mounting a wide range of special equipment. A 2-hole overhang die holder and a 2-piece gauging table are provided as standard equipment.

MODEL	IW-60S	IW-80S	IW-100S	IW-125S
	IW-60SD	IW-80SD	IW-100SD	IW-125SD	IW-165SD
PUNCHING
Punching Pressure	60 Ton	80 Ton	100 Ton	125 Ton	165 Ton
Punch Capacity	ø22 x 20	ø26 x 22	ø28 x 26	ø33 x 27	ø37 x 32
(Diameter x Thickness)	ø50 x 9	ø50 x 12	ø50 x 15	ø50 x 18	ø50 x 24
Throat Depth S:	310	310	310	310	---
Throat Depth SD:	510	510	510	510	510
Channel Flange Punch (Height)	180	180	180	180	180
Max. Stroke Length	100	100	100	100	100
Cycles / Min. (20mm stroke)	30	29	28	28	29
Working Height Up to Die	1010	1050	1050	1050	1050
FLAT SHEARING
Flat Bar Shearing	350 x 15	460 x 15	610 x 16	610 x 18	760 x 20
(Width x Thickness)	240 x 20	300 x 20	400 x 20	400 x 25	400 x 30
Blade Length	360	465	620	620	770
Angle Flange Trim	100	100	100	100	120
Working Height	910	926	964	920	920
ANGLE SHEARING
At 90o shearing	130 x 130 x 13	152 x 152 x 13	152 x 152 x 15	152 x 152 x 18	205 x 205 x 20
At 45o Miter shearing	65 x 65 x 8	80 x 80 x v10	80 x 80 x 10	80 x 80 x 10	80 x 80 x 10
Working Height	1115	1165	1225	1185	1185
BAR SHEARING
Round Bar Shear	ø40	ø45	ø45	ø50	ø60
Square Bar Shear	38 x 38	45 x 45	45 x 45	50 x 50	60 x 60
Channel Shear	130*	152*	152*	180*	203*
I Beams Shear	130*	152*	152*	180*	203*
Working Height	1220	1270	1340	1310	1370
NOTCHING
Rectangular Notcher (WxDxT)	50.8 x 90 x 9	50.8 x 90 x 12	63.5 x 90 x 12	63.5 x 90 x 13	63.5 x 90 x16
Vee-Notcher (Side x Side x T)	90 x 90 x 10*	90 x 90 x12*	105 x 105 x 12*	105 x 105 x 13*	105 x 105 x 16*
Large V-Notcher (Side x Side x T)	145 x 145 x 8*	145 x145 x 10*	145 x 145 x 12*	145 x 145 x 13*	145 x 145 x 13*
Working Height	910	926	964	920	920
SPECIAL TOOLING
Single Vee Press Brake (Wx T)	250 x 15*	250 x 15*	250 x 20*	250 x 20*	250x 20*
Multi-Vee Press Brake (W x T)	500 x 5*	500 x 5*	700 x5*	700 x 5*	700 x 5*
Angle Bending	102 x 6*	102 x 8*	102 x 13*	102 x 13*	102 x 13*
Pipe Notching	ø114*	ø114*	ø114*	ø114*	ø114*
OTHER
Electric Power	7.5 HP	10 HP	10 HP	15 HP	20 HP
Net Weight (Apr.) S:	1800 kg	2180 kg	2950 kg	3340 kg	---
Net Weight (Apr.) SD:	2200 kg	2650 kg	3450 kg	3950 kg	4950 kg
Gross Weight (Apr.) S:	1950 kg	2360 kg	3180 kg	3590 kg	---
Gross Weight (Apr.) SD:	2380 kg	2880 kg	3700 kg	4220 kg	5250 kg
Machine Dimension (Apr.) S:	1710x770x1690	1840x820x1730	2110x820x1800	2180x890x1840	---
Machine Dimension (Apr.) SD:	2080x770x1690	2220x820x1730	2470x820x1800	2480x890x1840	2720x890x2000
Packing Dimension (Apr.) S:	1980x930x1970	2110x980x2010	2380x980x2080	2450x1050x2120	---
Packing Dimension (Apr.) SD:	2350x930x1970	2490x980x1770	2740x980x2080	2750x1050x2120	2990x1050x2280

Unit: mm
* : Optional Tooling

Note: Based on material strength of 45kg/mm2 tensile.
Design and specifications subject to change without notice.